Menu Close

AD-FMCOMMS3-EBZ Board $379 Compatible FII- BD9361

AD-FMCOMMS3-EBZ Board $379 Compatible FII- BD9361
AD-FMCOMMS3-EBZ Board $379 Compatible FII- BD9361

FII-BD9361 –  Perfectly compatible with AD-FMCOMMS3-EBZ – Code compatible, development tool compatible, performance compatible, Smaller size and more space saving

– AD9361 Software Development Kit using the AD9361 RF Agile Transceiver

The FII-BD9361 is a high-speed analog module designed to showcase the AD9361, a high performance, highly integrated RF transceiver intended for use in RF applications, such as 3G and 4G base station and test equipment applications, and software defined radios. Its program-ability and wide-band capability make it ideal for a broad range of transceiver applications. The device combines an RF front end with a flexible mixed-signal base-band section and integrated frequency synthesizers, simplifying design-in by providing a configurable digital interface to a processor or FPGA.

The AD9361 chip operates in the 70 MHz to 6 GHz range, covering most licensed and unlicensed bands. The chip supports channel bandwidths from less than 200 kHz to 56 MHz by changing sample rate, digital filters, and decimation, which re all programmable within the AD9361 itself.

FII-BD9361 Features and Benefits

  1. Software tunable across wide frequency range : TX :47 MHz to 6 GHz RX:70 MHz to 6 GHz

  2. Software tunable bandwidth200 kHz to 56 MHz.

  3. Software tunable TX Power and RX Dynamic Range:TX>80dB RX>70dB

  4. Powered up from single standard FMC connector

  5. Supports MIMO radio,2 ways TX and 2 ways RXMax 4T4R by RF Switches configuration

  6. Supports FII-7030 and other standard FMC Connector Platform software radio application

  7. TX Power higher, Broadband flatness is better.

II-BD9361 Product Details – Completely Compatible with AD-FMCOMMS3-EBZ Board

  1. The FII-BD9361 is a high-speed analog module designed to showcase the AD9361, a high performance, highly integrated RF transceiver intended for use in RF applications, such as 3G and 4G base station and test equipment applications, and software defined radios. Its programmability and wideband capability make it ideal for a broad range of transceiver applications.

  2. The device combines an RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers, simplifying design-in by providing a configurable digital interface to a processor or FPGA. The AD9361 chip operates in the 70 MHz to 6 GHz range, covering most licensed and unlicensed bands. The chip supports channel bandwidths from less than 200 kHz to 56 MHz by changing sample rate, digital filters, and decimation, which are all programmable.

FII-BD9361 Interface:

Digital Interface:FMC-LPC
RF Interface: Four Way Differential Transceiver

FII-BD9361 Features

We support all features of AD-FMCOMMS3-EBZ such as:

TX band: 47 MHz to 6.0 GHz
RX band: 70 MHz to 6.0 GHz
Bandwidth Adjustment Range: 200 kHz to 56 MHz
Low noise figure: 2dB NF(noise figure/800MHz )
LO ,RX Gain Control,AGC
2.4Hhz local oscillator (LO) step
For more information, please check ad9361 introduction.

 

FII-BD9361 Applications

      1. General purpose design  for any software-designed radio application
      2. MIMO radio
      3. Point to point communication systems
      4. Femtocell/picocell/microcell base stations
      5. USRP
      6. 3G/4G signal and protocol analysis
      7. WiFi
      8. ISM

3. Compatible Boards

AD-FMCOMMS3-EBZ  (FII-BD9361 the same as )

(https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad-fmcomms3-ebz.html#eb-overview)

4. Support Boards

ZC702
ZC706
Zedboard
FII-PE7030

5. User Guide : (FII-BD9361 can use it )

https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms3-ebz

FII-BD9361 is developed by Fraser Innovation INC. It is absolutely compatible with AD-FMComms3-EBZ Board. The purpose of the AD-FMComms3-EBZ is to provide an RF platform to software developers, system architects, etc, who want a single platform which operates over a much wider tuning range (70 MHz – 6 GHz). It’s expected that the RF performance of this platform can meet the datasheet specifications at 2.4 GHz, but not at the entire RF tuning range that the board supports (but it will work much better than the AD-FMCOMMS2-EBZ over the complete RF frequency). We will provide typical performance data for the entire range (70 MHz – 6 GHz) which is supported by the platform.

This is primarily for system investigation and bring up of various waveforms from a software team before their custom hardware is complete, where they want to see waveforms, but are not concerned about the last 1dB or 1% EVM of performance.

You can find the user guide in above link at analog website. We will send you hardware configuration and system Scheme Diagram when you purchase this products.